|
|
Round Production Line Overview
The above video shows the complete manufacturing line for producing drip irrigation pipe with inline round drippers. First the cylindrical emitters are oriented in a single file linear fashion and fed into the molten irrigation pipe at a specific spacing determined by the operator interface on the inserting machine. When the drippers are inserted into the polyethelene (PE) pipe they bond with the inner surface of the pipe. The pipe is first fed through a vacuum/cooling chamber and then through a second cooling chamber in order to solidify the pipe. The pipe then travels through the high speed dripper perforating (drilling) device capable of drilling +300 drippers per minute which drills 2 or 4 water outlets on each dripper. The pipe is then cut in coil lengths determined on the operator interface of the inserting machine and coiled in an (optional) automatic coiling machine.
|
|
 |
|
|
|
